| Author |
|
TonyNo
Moderator Group
Joined: December 05 2001
Location: United States
Online Status: Offline
Posts: 2889
|
| Posted: October 31 2016 at 07:24 | IP Logged
|
|
|
Is there a process for adding a module to PH that was initially set up for use with an ISY (keeping both sets of links)? I have one lamp module that I can't get to respond to PH.
|
| Back to Top |
|
| |
dhoward
Admin Group
Joined: June 29 2001
Location: United States
Online Status: Offline
Posts: 4447
|
| Posted: November 03 2016 at 20:52 | IP Logged
|
|
|
Tony,
Not sure why it would give you problems. As long as
you can communicate with the lamp module from
PowerHome then PH should be able to create the links
and then effect control. I believe the ISY though
might have an issue with links created outside of the
ISY but not sure. Of course my info is probably very
dated and this may no longer be an issue.
If you cant communicate with the lamp module at all,
then it's likely a newer I2CS device and PH may be
having a problem creating the initial link that I2CS
requires. I would try manually linking the lamplinc to
the PH PLM with the PLM as a controller. Once this
initial manual link is made, you should be able to
read/update the links and control the lamp module.
Hope this helps,
Dave.
|
| Back to Top |
|
| |
TonyNo
Moderator Group
Joined: December 05 2001
Location: United States
Online Status: Offline
Posts: 2889
|
| Posted: November 04 2016 at 06:40 | IP Logged
|
|
|
Would that manual link just be added to the module (not losing the ISY link)?
This is a newer module.
|
| Back to Top |
|
| |
dhoward
Admin Group
Joined: June 29 2001
Location: United States
Online Status: Offline
Posts: 4447
|
| Posted: November 04 2016 at 08:12 | IP Logged
|
|
|
Tony,
Yes. Whatever the module is currently linked to should be unaffected and the new link will just be added.
Let me know how it goes.
Dave.
|
| Back to Top |
|
| |
Active Topics 
Memberlist 
Search 
Help
Register 
Login
PowerHome Messageboard : PowerHome Hardware
Topic: ISY Coexistance
